Look for this in commercial and residential structures. The way that this beam is pocketed will allow it to fail much faster than normal.
As we all know, these beams support much of the center of the building with floor joists resting on them.
Steel will deform and twist and this beam will meet little, if any, resistance during a fire. I understand that a pocket of concrete will not keep this beam from dislodging, but it there is a reason for properly pocketing these beams.
Not to mention a small tremor or bump from equipment or remodeling can compromise the stability of the beam.
Just one more thing to keep an eye on when doing inspections, especially during construction.
Stay safe and be careful.
Tags:
The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.
Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.
For vetted content, please go to www.fireengineering.com/issues.
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.
Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.
Check out the most recent episode and schedule of UPCOMING PODCASTS
45 members
116 members
62 members
73 members
166 members
65 members
277 members
510 members
10 members
106 members
© 2024 Created by fireeng. Powered by
FE Home | Product Center | Training | Zones | Fire-EMS | Firefighting | Apparatus | Health/Safety | Leadership | Prevention | Rescue |