Fire Engineering Training Community

Where firefighters come to talk training

Last week I was doing safety checks on vehicles for “Crunch Time”. While removing a passenger side seat belt pretensioner from a 1995 VW Jetta, the pretensioner (non-electrical) deployed. Before I started the removal process, I confirmed that the battery was removed. I then cut the seat belt to reduce my exposure and then I removed the cable/exhaust tube from the rocker panel. Next I removed the bolt attaching the pretensioner from the B post. As I was maneuvering the pretensioner from the B post the pretensioner deployed. I had my helmet, eye protection and gloves on during deployment. First time in fifteen years that I had a SRS deploy on me.

Views: 161

Replies to This Discussion

Do not take these tools for granted.I have had a few airbags go off on me just setting up for simple training scenarios.
There is a lot of care involved when it comes to these units. If you would like to shoot a line back and forth and talk that would be great.
Play Hard Train Safe !!

RSS

Policy Page

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

Fire Engineering Editor in Chief Bobby Halton
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our policy page. -- Bobby Halton

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

© 2021   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service