Fire Engineering Training Community

Where firefighters come to talk training

Rob Cannon's Discussions (18)

Discussions Replied To (17) Replies Latest Activity

"A few months ago I began to color code every tool on each piece of apparatus in our…"

Rob Cannon replied Apr 22, 2009 to Up-keep of hand tools

6 Apr 29, 2011

"A few months ago I began to color code every piece of apparatus in our fleet. During…"

Rob Cannon replied Apr 22, 2009 to Up-keep of hand tools

6 Apr 29, 2011

"I could find out, but all I know is that I can switch blades like any other cut off…"

Rob Cannon replied Jan 21, 2009 to Stihl TS 460 Cut off saw

6 Jan 21, 2009
Reply by Nate Brown

"This topic is like me saying my fire engine is better than yours."

Rob Cannon replied Jan 21, 2009 to Vindicator

23 Jan 22, 2009
Reply by Kirk Allen

"YES... what many FF's forget is that we don't enter till our officer tells us to, us…"

Rob Cannon replied Jan 20, 2009 to Scba face piece

33 Apr 19, 2009
Reply by Brett Butler

"I don't do it and here's why... - My peripheral vision is blocked. - Mask fogs up.…"

Rob Cannon replied Jan 20, 2009 to Scba face piece

33 Apr 19, 2009
Reply by Brett Butler

"My previous dept. uses the same saw, but is using the Warthog blade along with concr…"

Rob Cannon replied Jan 20, 2009 to Stihl TS 460 Cut off saw

6 Jan 21, 2009
Reply by Nate Brown

"We did this during our recent ISO evaluation. Have you had an ISO evaluation done in…"

Rob Cannon replied Jan 19, 2009 to Long Lay and Limited Access/Water mapping

6 Jan 22, 2009
Reply by Joel Holbrook

"They're a decent nozzle ... they work better as a foam nozzle."

Rob Cannon replied Jan 19, 2009 to Vindicator

23 Jan 22, 2009
Reply by Kirk Allen

"Joe, Well put brother! The exception to the rule for vollies is on the east coast. I…"

Rob Cannon replied Jan 18, 2009 to The Only Difference

29 Jan 18, 2009
Reply by Joe McClelland

RSS

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

Groups

© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service