What hook do yo prefer?

Replies to This Discussion

Permalink Reply by Anthony Avillo on June 19, 2008 at 9:30pm

Halligan hook is the most versatile
can do everything the pike pole does and more
actually the pike pole sucks in comparison
all those wierd wesat coast hooks and rake stuff like they use in boston never caught on in NJ and NY
keep it simple
halligan hook is THE tool

Permalink Reply by Jamie Morelock on June 20, 2008 at 7:46pm

I have always been a roof hook (halligan hook) type of guy, but recently have grown fond of the trash rake (LA rake, arson rake). It was by accident that I was able to use one during overhaul and found it to be highly efficient in the lath and plaster construction predominately found in my district. The more I work with it the more I discover its worth. A little research in Rick Fritz's Tools of the Trade never hurts either. Most hooks are only as efficient and functional as the firefighter's understanding of it applications and limitations.

Permalink Reply by Anthony Avillo on June 20, 2008 at 9:48pm

good call
u can never be too versatile
stay safe

Permalink Reply by Chuck on June 21, 2008 at 8:01am

I use a steel hook

Permalink Reply by Chad Berg on June 21, 2008 at 10:36am

First of all, Anthony, it's the WEST Coast not "wesat" (that is Chief for "we are always sitting") - Just kidding of course.
We use both of the hooks discussed, but not for the same operations. We use the Trash hook (LA rake, whatever) for ventilation operations. I'ts great for foot placement off of roofers that can pivot and change with cut sequences. It is also great for pull backs on skip sheeting roofs which we have alot of, it also provides a much bigger punch area vs. any other hook when punching down through the ceiling performing vertical ventilation and sounding while traveling flat roofs looking for structural members.
The All Purpose hooks/Halligan style are superior to any pike pole for sure. Around 8 years ago, our department switched to these following a demo period and have had great success. The guys love them, because they feel that they have a greater surface area for pulling down ceiling. You also have the ability to lever off of the back of the opposite side of the hook for prying off boards, trim, and siding. Even our Engine company officers are assigned this tool for interior operations while attacking the fire. They use the "D" handle to sound the floor and the all purpose hook to check overhead and vent if need be.

Permalink Reply by Robert Woodhead on July 1, 2008 at 7:11pm

NY 6 foot roof hook....
I found out if used right you can open doors with it ...

Permalink Reply by John Marino on July 11, 2008 at 10:34pm

NY roof hook all the way. All steal. If you use the punch method it works great.

Permalink Reply by Robert Woodhead on July 12, 2008 at 12:23am

yes the punch method works great with this tool... if used the right way the Ny hook is a great tool to have... if its a ovm tool are on the roof tool ... if you know what to do with and come up with new ways to use it you are a head of the game that gos for any tools alot of paid dept some guy make there tools... Stay safe Guys

Permalink Reply by Bruce Green on July 25, 2008 at 12:01pm

NY roof hook- we carry them in various lengths made of the aircraft steel. We do have an ''LA Trash Hook''....we use it for pulling apart crap in dumpsters etc...its okay but we dont use it for many other things. NY Roof Hook is the way to go. You can tell a lot about a department by the quality of the tools they carry.

Permalink Reply by Larry Glover on August 3, 2008 at 9:10pm

My favorite hook is the "dry-wall hook". I haven't got to try the "NY" roof hook out yet. My only complaint is that they cut the D-handle off the dry-wall hook so they could mount it.

Permalink Reply by Chad Berg on August 12, 2008 at 1:44pm

so true Bruce, so true!

Permalink Reply by TR Hagerty on August 12, 2008 at 3:26pm

David

I love the Z hook with a Boston rake on the other end that works the best for me when pulling ceiling. We have 6 Ft and 3 Ft . I think the Halligan is also a grest tool also I do take that with me also most of the time. Have both tools in a hand reach. Good Discission Thanks TR

• ‹ Previous
• 1
• 2
• 3
• Next ›
• Page