Fire Engineering Training Community

Where firefighters come to talk training

I know we have always been taught to search with a tool in case we need to breach a wall or become trapped and need another way out. Just curious, anyone out there conduct searches without a tool in hand?

Views: 179

Reply to This

Replies to This Discussion

-A firefighter without tools is nothing more than a well dressed spectator. Unless the firefighter is operating the nozzle he must have tools with him.
-Traditionally firefighters are taught to search with a tool, using the tool to probe. This is emphatically incorrect and dangerous to a potential victim that will be harmed by a probing tool. Moreover, firefighters will not recognize objects, let alone an unconscious victim, thru the shaft of a steel tool.
-It is much better to use the tool in reverse, to create an anchor point thus extending your reach.
-The tool can be hooked over a window sill, around a door frame or even driven into a wall to create an anchor while the firefighter holds the tool and extends his reach almost three additional feet into the room. Searching with the free hand is safer to the victim, faster for the firefighter and the firefighter is much more likely to identify objects with his gloved hand than thru the shaft of a tool.
-Moving the victim back to safety is easier with an established anchor.

Michael,

Thanks for the input.

Amen Brother! No one, absolutely NO ONE steps of the rig (other than the nozzleman) without a tool.

 

 

 

Other than the man on the nozzle everyone needs to have a tool, searching with the tool can be ineffective but utilizing it as and extending tool so you can still be oriented to a wall while extending your reach towards the innermost areas of the room is acceptable. We utilize a tool during all interior operations, it’s a standard among the fire service from what I’ve been taught. Good subject though

 

 


I'm totally agree with you !

 

 


_________________
Watch Drive Angry Online Free



Shareef Abdu Nur said:

I agree with Michael Bricault, but there is also nothing wrong with the nozzleman grabbing an axe and sliding it under his/her SCBA strap upon exiting the cab.


 

 

 

Reply to Discussion

RSS

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

Groups

© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service