Where firefighters come to talk training

UH-10 thru Scott EZ RadioCom

I am trying to find a way to run the D/O and IC Firecom UH-10 headsets thru our Scott EZ Radiocom II communications set. Neither Firecom nor Scott make an interface that will accomplish this and I have yet to find a third party vendor that makes one.

Has any one found a company that can do this, or is it a non-issue with most operations?

▶ Reply to This

Replies to This Discussion

Permalink Reply by Larry Lasich on January 28, 2009 at 10:28am

Still trying to find this. Any help?

▶ Reply

▶ Reply to Discussion

RSS

Welcome to
Fire Engineering Training Community

Sign Up
or Sign In

Or sign in with:

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.