Fire Engineering Training Community

Where firefighters come to talk training

Chad Berg's Comments

Comment Wall (100 comments)

You need to be a member of Fire Engineering Training Community to add comments!

Join Fire Engineering Training Community

At 12:08pm on November 7, 2009, Ben Fleagle said…
Quite the procession to honor the fallen Seattle Officer. Were you guys a part of it? Did you cover for Seattle?
At 6:44pm on November 4, 2009, Ben Fleagle said…
HEY CHADDDDDD!!!!! Whats up?
At 5:28pm on September 18, 2009, Michael Bricault (ret) said…
Hi Chad. I left some comments in your discussion in Aerial Operations. Just my thoughts and rants.
At 10:58am on July 13, 2009, Ben Fleagle said…
Thanks, Brother. I need to bounce a few things off you, I like the way you think things through..we should talk. I have no time. I'll call as soon as I can.
At 1:58pm on May 23, 2009, Todd McKee said…
Dear Friend,

Please allow me to invite you to the group called HazMat Placards to Success. This group will allow firefighters to discuss a step by step process for a Hazardous Materials response. From the firefighter to the hazmat technician. The first step has been posted in the group, with many more steps to come.

Thank you!
Todd McKee
At 10:04pm on April 25, 2009, Ben Fleagle said…
Hey Brother

Did you see the video posted on your Forum? Unfortunately it ends just before you declare you're about to lose your lunch, but the effect is there none the less. Let me know what you think!
At 10:29pm on April 12, 2009, Ben Fleagle said…


Dunno if this will show up, but its a pic my daughter took I thought you might enjoy.
At 12:21am on April 6, 2009, Michael Haefner said…
Chad,
Im glad I finally got the opportunity to meet you and there couldent have been a better place. I had a lot of fun learning things from a true truckie. Thank you for all your teachings, stay safe and keep in touch.
At 9:44pm on March 18, 2009, Ben Fleagle said…


Hey Brother,

Havin' hot time in the city! Actually, I can came in on call back and missed out on the hot stuff, just a lot of defense and overhaul. Lost our favorite spot for pancakes on a Sunday morning. Roof came in right after the interior lines pulled out. Call me, we need to talk about class...time is short!! Lodging is set!
At 5:51pm on March 15, 2009, scott corrigan said…
The belt that you made is great!! Getting a lot of comments. I took the flyer and forwarded if to my dist. list of emails and printed it out and hung them at work. I have one that should be sending in a request right away (he is our AC's kid). Thanks again, it works and looks great. Scott
At 5:24pm on March 2, 2009, Brandon Roark said…
Brother Berg, could you take a look at http://community.fireengineering.com/xn/detail/1219672:Topic:125613 and offer your two cents worth regarding venting metal roofs (residental and commerical)??
At 4:39pm on February 22, 2009, Brendan Grace said…
Ya I just wanted to be where all the cool kids are.
At 11:41pm on February 19, 2009, Billy lewis said…
always a great time around you guys. Hope to see ya in Maine Brother.
Till then be safe.
At 2:23pm on February 17, 2009, Ben Fleagle said…
The Two Chads: Goin to Alaska!!!!!!!!!!!!!!!!!!

Hey brother, we got ten dedicated students, we got supplies, we got the Psyche House, we'll probably have some ribs again too! Lookin' for ward to rockin' this out.

Oh, ...it will be somewhat colder than previous years.
At 11:36pm on January 26, 2009, Billy lewis said…
SD for sure. Good times....0500 jog? No Good? See ya there Brother
At 2:06pm on January 11, 2009, Ben Fleagle said…
Here's a thought. The United States of the Western Coast. Alaska, BC and Washington. Yeah? You said you were cut off except through the North. I figure if you can put up with a few Cannoooks, we can make a go of it. Be'in cut off isn't all that bad once you get used to it.
At 5:28pm on January 8, 2009, Eric Hankins said…
Chad,

Are you still dry Bro?

Call me...

Stay safe,

And if Kristie is missing that old mustache feel, then.... never mind
At 9:24pm on January 7, 2009, Ben Fleagle said…
Hey,

You aren't cold are yuh? Itsssss..........-55555-5----(asystole has set in)0000 below here..
So anyway, just got off the phone with my new soon to be boss, he and I have a lot in common and very similar mindsets and "core" values. I think we're going to be okay. Look forward to talking with you, bud.
At 1:28pm on January 3, 2009, le neouanic laurent said…

hello my name is laurent so french paramedic fire figther,i search for trade uniform's and helmet's for my collection ,thank's for your reponse my blog : http://sssm22.skyrock.com/
my mail : laurent.leneouanic@cegetel.net
happy new year for you and your family ,so long .laurent
At 1:07pm on December 30, 2008, Ben Fleagle said…
-40 going down...........Headline in paper says that "-50 degrees will seem passe in the coming week". Yeah. Flippin' sweet.

Hey brother, just wanted to let you know, I'll be privileged to remain in charge of my company for the foreseeable future. Our win/win was turned upside down the other day. I'll call you and tell you all about the latest.

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service