Pitched roof simulator prop plans

Replies to This Discussion

Permalink Reply by Larry Lasich on May 23, 2009 at 9:45pm

There are pictures, and maybe plans, from a previous thread. you should be able to get the thread from a search.

Good luck,
Larry

• ▶ Reply

Permalink Reply by James Vickers on May 24, 2009 at 10:26pm

Define low cost?

• ▶ Reply

Permalink Reply by Dave Kruse on May 28, 2009 at 8:13am

Under $1000.00 would be great.

• ▶ Reply

Permalink Reply by Brooks Kleffman on June 1, 2009 at 3:16pm

Dave,
not quite sure what your looking for but heres an idea. I am a local contractor as well as a 6 year career fire fighter. Many times when i build homes, i either fireld frame some rafters or have extra ones or wrongs get made and sent out. I am curently helping my lt. teach an essentials calss and we are going to use some of those "extra" rafters that are smaller to build a roof simulation prop. we are going to place it on a flat bed trailer and then finish it like a real roof would be finished. So my point is, check with some local contractors to see if they too have some "extra" roof trusses they dont need. More than likely, they will be happy to get rid of them, instead if them having to do the work to dispose of them. Let me know how this works.

• ▶ Reply

Permalink Reply by Dan Weaver on June 1, 2009 at 9:00pm

Dave

I don't how to search the archives of this site but I posed the same question about a year ago. If you can find it there were many useful ideas.

I will continue to look for it in the mean time. Be Safe

Dan Weaver

• ▶ Reply

Permalink Reply by Dan Weaver on June 1, 2009 at 9:14pm

Dave

Its under roof prop plans on page 25 of this forum

Dan Weaver

• ▶ Reply

Permalink Reply by Dave Kruse on June 2, 2009 at 12:51pm

Dan Weaver said:

Dave

Its under roof prop plans on page 25 of this forum

Dan Weaver

• ▶ Reply

Permalink Reply by Dave Kruse on June 2, 2009 at 12:51pm

Thanks,
Dave

Dave Kruse said:

Dan Weaver said:

Dave

Its under roof prop plans on page 25 of this forum

Dan Weaver

• ▶ Reply

▶ Reply to Discussion