Ive been assigned to look into getting solid bores fro our department as we now use the Elkhart Chief combination fog nozzle.
The nozzle i was leaning towards was the Elkhart Soldbore:
http://www.elkhartbrass.com/products/nozzles/solid-strike/brochures
I hope Im on the right track. Im new to the solidbore but an instant fan as it seemed to be more easier to use and safer to use then the fog nozzles we have for interior attack now.
Wayne
The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.
Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.
For vetted content, please go to www.fireengineering.com/issues.
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.
Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.
Check out the most recent episode and schedule of UPCOMING PODCASTS
180 members
74 members
330 members
614 members
13 members
123 members
16 members
411 members
83 members
6 members
© 2023 Created by fireeng.
Powered by
Home | Product Center | Training | Zones | EMS | Firefighting | Apparatus | Health/Safety | Leadership | Prevention | Rescue | Community | Mobile |