Fire Engineering Training Community

Where firefighters come to talk training

This a photo that was sent to me a few months ago and I just recently came across it again.  I've never seen this before, but there are some obvious challenges.  What do you think and what are some of those challenges?

Views: 936

Reply to This

Replies to This Discussion

The question I would first ask is what type of glass is it? It also looks like it is all tied together. I believe I would treat it as a truss..once one section fails the rest may fail as well. Having this identifed in pre-plans and ensuring alternate routes for operations and egress would be a good start to this scenario.

 

As Mr. Huston states, I would definately treat it as a truss. Another problem I see is the use of TICs creating false images, along with any tolls / couplings / hose streams breaking the glass

 

To add another thought , The glass is going to be extremely slippery ,even if still functional for overhaul ,

Reply to Discussion

RSS

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service