Fire Engineering Training Community

Where firefighters come to talk training

Extrication "Quick Tip" #28 (COMPRESSION CUT)

During extrication courses, I commonly see students struggle with posts/pillars that are slightly larger than what can be severed with a single cut. This can be due to post thickness, width, or various trim pieces in the way. One often-overlooked method that works very well is a style of compression cut. As shown below, the post in the picture is just outside of the range to complete with a single cut and is a great situation to use a quick compression cut.

1.) Place the cutter as deep "seated" on the area to cut as possible.

2.) Start the cut/compression of the post. When you compress and "size down" the post to be cut, stop, and open the cutter slightly.

3.) The compression of the post will allow you to slide the cutter all the way to the bolt and make a complete sever of the post. 

This method quickly allows you to cut something outside of the cutters single cut range, without making numerous/wasted cuts.

ISAAC FRAZIER is a Special Operations Lieutenant with St. Johns County Florida’s Heavy Rescue “Squad 4”. First due to the deadliest stretch of roadway in the nation, Frazier teaches from personal street experience providing tried and true tactics. Frazier is the owner of Tactical Advantage Training and creator of the course Tactical Extrication. Frazier travels nationally sharing his passion teaching fire and extrication courses. Frazier is a Fire Officer II, FL Paramedic, Special Operations Officer, Florida State Instructor, FLUSAR Tech, Diver, and FL Hazmat Tech.  www.TrainTacticalAdvantage.com

 

Views: 4307

Comment

You need to be a member of Fire Engineering Training Community to add comments!

Join Fire Engineering Training Community

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service