Tags:
Permalink Reply by Larry Lasich on January 5, 2010 at 11:44am Why not keep both and change out as needed? My "go to" would be a straight stack, but if you need to change them out, it doesn't take long to do. I like having the stack tip for the flow, reach, punch, small diameter (goes through small openings) and being less affected by wind. Plus, there is an extra control (stream shape) that you don't need to worry about.
It depends on what you think you will need it for, but like attack lines, you need to stay Semper Gumby.
Permalink Reply by Larry Lasich on January 5, 2010 at 11:58am Keep the stack tip on, and build a box or clamp for the fog stream that is at the end of the ladder.
Permalink Reply by Larry Lasich on January 5, 2010 at 12:02pm Thanks for the advice this really helps
Larry Lasich said:Keep the stack tip on, and build a box or clamp for the fog stream that is at the end of the ladder.
Permalink Reply by Adam Miceli on January 8, 2010 at 7:56am We have stacked tip on all our master streams, ground guns, deck guns and the aerial gun. We've yet to switch to one of the fog guns we carry on each. In fact I can only think of a few times I'd really want them and that is for creating an air current to disperse vapors, the overhead "mass decon shower", and possibly exposure protection where the siding was very poor (gasoline siding or loose wood shingles?)
We held an aerial class last year with local FD's and brought in Lt. Mike Wilbur of FDNY and Emergency Vehicle Response and he was very convincing on the use of smoothbore guns. Defensively, you'll almost always want the punch, the fog nozzle increases the reaction force (significant at large flows) which can be damaging to the aerial if opened and closed or moved too quickly. The two other FD's in class now sport stacked tips on their aerials. As icing on the cake for the class, a large hotel under construction burned in one of the towns and it was a big mutual aid job, with an after action critique at which time all the smoothbore vs. fog MS hold out were sold on the stacked tips. High winds and tree branches destroyed most of their stream.
Ricky: Can you explain the theory behind the Fog MS being used as protection?
Permalink Reply by Michael Bricault on May 18, 2010 at 1:49am
Permalink Reply by Michael Bricault on May 18, 2010 at 1:52am We have stacked tip on all our master streams, ground guns, deck guns and the aerial gun. We've yet to switch to one of the fog guns we carry on each. In fact I can only think of a few times I'd really want them and that is for creating an air current to disperse vapors, the overhead "mass decon shower", and possibly exposure protection where the siding was very poor (gasoline siding or loose wood shingles?)
We held an aerial class last year with local FD's and brought in Lt. Mike Wilbur of FDNY and Emergency Vehicle Response and he was very convincing on the use of smoothbore guns. Defensively, you'll almost always want the punch, the fog nozzle increases the reaction force (significant at large flows) which can be damaging to the aerial if opened and closed or moved too quickly. The two other FD's in class now sport stacked tips on their aerials. As icing on the cake for the class, a large hotel under construction burned in one of the towns and it was a big mutual aid job, with an after action critique at which time all the smoothbore vs. fog MS hold out were sold on the stacked tips. High winds and tree branches destroyed most of their stream.
Ricky: Can you explain the theory behind the Fog MS being used as protection?
Permalink Reply by Jeff Schwering on June 5, 2010 at 11:36pm 
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our policy page HERE. -- Bobby Halton
Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peterp@pennwell.com.
Does your fire department have a policy concerning working above or below truss assemblies involved in fire? CLICK HERE to send us your reply.
© 2013 Created by fireeng.

| Home | Buyer's Guide | Training | Zones | EMS | Firefighting | Apparatus | Health/Safety | Leadership | Prevention | Rescue | Community | Mobile |
