-Jim McCormick in Indianapolis is a great resource. He is an LT with Indianapolis FD as well as the director of the Fire Dept. Training Network, a training school which puts on some of the best firefighter training available and without a doubt the best and the toughest firefighter survival training available anywhere.
We built our prop from three sheets of plyood and some 2x4, It goes up two steps then travel flat for 5 feet then its cut and braced with the last couple of feet hinged with the end setting on a single peice of 2x4 cut inhalf stacked ontop of each other and held together with a hing, attached to a rope. You pull the rope two 2x4 splits in half and you drop the last three feet of floor at less than a 45 degree angle. We have a pile of foam as pit around the end. We had to watch people who slid head first into the foam originaly so we made the angle a bit less more floor that falls less than two feet.
Just an FYI Ray
I was watching youtube and saw this young kid talking about how it was no bull, he knew how to handle the rope rescue, from the roof of a burning building. Cool, who knew you were a video start way back then, it ws funny. It was from a peice of the old RESCUE 911 episode.
Ray McCormack said:
Do you mean the firefighter is trapped in the ball pit.
My dept just completed a Mayday training where a "floor collapse" was one of the props. We used a solid wooden door that pivoted on a fulcrum consisting of metal pipe. In our scenario, the firefighter falls into a foam pit. Our pit was incorporated into a stair well. Meaning the firefighter decends one flight of stairs to a landing, then one-half flight of stairs to the floor collapse prop. It worked very well.
If anyone is still interested, let me know and I'll check with our Training Division for specs on this prop. I have detailed pictures of it as well.
Just found out from our Training Captain that he doesn't have specs and just envisioned it. So I'll need to create some specs or at least get a couple more photos regarding some details. Once I get those I'll let everyone know.
I just completed a RIC/ Safety and Survival Weekend, and the academy just rebuilt the mask confidence course to include a floor collapse simulator. It was a 4' high, 4' wide by 8' long box with 5 stairs up to the top platform which was about 3 feet long, hinged near the top of the stairs, and held up by a small dowel at the other end. When you crawl onto the platform, your weight breaks the dowel and you fall into the box which was padded with some old sofa cushions. I'll try to make up some specs for you.
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our policy page HERE. -- Bobby Halton
Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail email@example.com.
Does your fire department have a policy concerning working above or below truss assemblies involved in fire? CLICK HERE to send us your reply.