Permalink Reply by Kevin Story on November 15, 2011 at 8:27pm Scott this is a pretty broad question in regards to high-rises as the answer to ventilation of high-rises is driven by the building and it's systems. The second part to answer this is the occupancy of the high-rise itself.
Yes, I guess it was too broad. I more or less wanted to see if a discussion would follow and wanted to see what factors would come into play (ie. Wind drive fires, vented stairwell, pressurized stairwell, Measures M, height, new construction, etc). I will just throw it out there...I have been assigned the upgrade on our P&P and was looking or new methods that may have been incorporated into SOG's or SOP's. Any comments appreciated.
Permalink Reply by Kevin Story on November 16, 2011 at 7:34am Shoot me an email kevinstory7@aol.com
Over the years are department would vent while suppression was taking place. Like most departments, manpower during the day was playing a roll. We now pressurize the home while doing suppression. I wasn’t sure how this was going to work, but after several fires, I like it! I think venting has it’s time and place, but you need to have the key players in place when it’s performed.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our policy page HERE. -- Bobby Halton
Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peterp@pennwell.com.
Does your fire department have a policy concerning working above or below truss assemblies involved in fire? CLICK HERE to send us your reply.
© 2013 Created by fireeng.

| Home | Buyer's Guide | Training | Zones | EMS | Firefighting | Apparatus | Health/Safety | Leadership | Prevention | Rescue | Community | Mobile |
