Up-keep of hand tools

Replies to This Discussion

Permalink Reply by Gary Rauch on April 22, 2009 at 10:30am

If you are assigned to an apparatus with riding assignments, you need not only the up keep of that rigs tools but most important the tools that are assigned to you. Always keep the tools clean of dirt, tar, and paint and keep the edges free of burrs and chips (so put an edge on them). Also inspect them for cracks in the handles and heads. Do this and the tools will not fail you.

BE SAFE!

▶ Reply to This

Permalink Reply by Rob Cannon on April 22, 2009 at 10:19pm

A few months ago I began to color code every piece of apparatus in our fleet. During that I cleaned all axes, hooks, bars, etc of surfacr rust and paint. I then sprayed very light coat of poly to extend the time between each cleaning. We don't use our tools as much as the brothers east of do, so it works ro our benefit.

I also followed the standard sharpening process for axes and up-keep of the wood handles tools we still have.

PTB-EGH

Rob

▶ Reply to This

Permalink Reply by Rob Cannon on April 22, 2009 at 10:22pm

A few months ago I began to color code every tool on each piece of apparatus in our fleet. During that process I cleaned all axes, hooks, bars, etc of surface rust, paint, etc. I then sprayed very light coat of poly to the metal surfaces to extend the time between each cleaning. We don't use our tools as much as the brothers to the east of do, so it works to our benefit.

I've noticed how much easier it is to clean them from now on, in addition to much better it feels to look at each tool and see it in a clean and working order.

I also followed the standard sharpening process for axes and up-keep of the wood handled tools we still have.

PTB-EGH

Rob

▶ Reply to This

Permalink Reply by Chris Roth on April 22, 2009 at 11:07pm

We do maintenance on the tools as it is needed. We inspect after they get used. Wash them with normal soap and water to keep them clean. Apply paint as needed. The best thing to do is not paint at all but some depts. want stuff painted. For the Wood handles use the linsead (don't know if that is correct spelling) oil on them to help keep the wood good.
It all comes down to the pride you have in your equipment. Do you want to walk up to a scene with stuff that looks like you care about it or stuff that has contents of the fire 2 months ago still on it. When you are on duty it is your truck that day. Make your stuff look good. Like Gary said good maintained tools will show damage if they are. Dirty unkept tools will hid cracks or other issues until you need it.

▶ Reply to This

Permalink Reply by Scott Kahn on April 24, 2009 at 12:10am

Tom,
To add to Chris's reply below, make sure that it is boiled linseed oil for use on wood handles. If you use regular linseed oil, it will not dry properly and always be sticky.

▶ Reply to This

▶ Reply to This