Fire Engineering Training Community

Where firefighters come to talk training

I am looking for any infromation on the use of an aerial as a high point anchor. Infromation on not moving the ladder with a victim attached, example not using the aerial like a crane. Also looking for infromation on the use of a construction crane to move a stokes with a victim and attendant. Thanks.

Reply to This

Replies to This Discussion

Todd,
My department had a rescue call just as you describe a few weeks ago I ran the rescue operation off of the 7th floor of a building under construction. We have a 2002 Pierce tillered aerial with a heavy duty ladder. On the egress section of the ladder there are holes under the last rung that allow you to attach a spreader bar. This allows the load the remain in the center of the beams to evenly distribute the weight. I used the ladder as a high point, attached the stokes to the high point and then swung the aerial out over the street. We then lowered the stokes to the ground. The operation went very smoothly. The operations manual of your aerial should tell you weather the operation is allowed and then suggest proper technique. As far as using a construction crane to lower a victim, here are my thoughts. I will use my equipment and my guys to perform rescue ops. before going to the crane. I know my equipment and my guys and know what they can and can not do. Using a crane with an operator you do not know is taking control of the operation out of your hands. Hope this helps.

Reply to This

Reply to This

RSS

A Message From Bobby Halton

Fire Engineering Editor in Chief Bobby Halton
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our policy page HERE.

Badge

Loading…

Fire Engineering Features

NFPA 1403 Live-Fire Evolutions at Fire Service Training Centers

Live fire training is an essential part of a firefighter's education, but there are significant differences between training at gas-fired versus non-gas-fired structures. Mike Gurr takes a closer look.

Fire Engineering University: Online Continuing Education for Firefighters

Fire Engineering University is changing the way fire service professionals approach continuing education. Our goal is to provide you with relevant, topical educational content that is easily accessible. For a full listing of courses with descriptions, credits, and fees, go to www.fireengineeringuniversity.com.

New Vehicle Extrication: 2010 Lexus HS250h

The first compact hybrid luxury sedan, this hybrid only model contains several unique features, including numerous air bags. Jason Emery reviews considerations for vehicle rescue operations.

© 2010   Created by fireeng

Badges  |  Report an Issue  |  Privacy  |  Terms of Service