Where firefighters come to talk training
Wire Cutters
I have found that using pruning shears work much better than conventional wire cutters. They are spring opening and have wide gap to get on the wires easy. Normal shears will cut a 3/4 " to 1' limb.
I went to the local hardware store and found the Fiskar brand ones work very well, they have an internal spring and a thumb release. These are really easy to use with structural gloves and cut wires & cables really easy.
I went to the local hardware store and found the Fiskar brand ones work very well, they have an internal spring and a thumb release. These are really easy to use with structural gloves and cut wires & cables really easy.
Replies to This Discussion
-
Permalink Reply by Jeff Schwering on -
Nice to know, sounds like they would work well in a RIT bag also. Does anyone else in the area use them or did you find them on your own? I need a new pair of wire cutters, Thanks
-
Permalink Reply by Don Pysz on -
A Captain in our dept. had a pair, but they were of the type with the spring exposed. This spring popped off on me during scba maze drills, so I went back to the store and found the Fiskar brand with the internal spring. I have used them several more times in the maze w/o any problems. I also have used them on battery cables and other larger diameter things that needed cutting.
-
Permalink Reply by Jeremy Hartman on -
I like to carry a pair of 10 inch cable cutters; they are blunt end to keep from stabbing myself in the leg if I fall on them. What else do you carry? I had a pair of channel lock pliers. I don’t know if I’m going to replace them. Everything else I carry is pretty much the norm I think chocks webbing and 2 large carabineers.
-
Permalink Reply by Ricky Teter on -
Great Idea, I've been trying to find something spring loaded that can operate easily with gloves on this sounds like something to try out. Thanks for the info!
-
Permalink Reply by Larry Glover on -
I found a pair of 7" cutters that are spring loaded at Lowe's. I believe they are Kobalt. They have a little locking mechanism that keeps them closed but it is not hard to unlock them with a glove hand. Great idea on the pruning shears. I'll try those out also.
-
Permalink Reply by Don Pysz on
-
Here is a photo attached of the pair I carry, the internal spring won't pop off like the external type.
- Attachments:
-
-
shears.jpg, 73 KB
-
-
Permalink Reply by Todd Trudeau on -
I tried my Fiskars shears with a few different gauge wire and they just spread a little causing the wire to just bend. The spring feature mentioned did intrigue me though. Went to Home Depot and found Channel lock cutters, spring loaded (about $21 and made in the USA). Put a rubberband on the end to keep them closed until I need them. Perfect length to fit in my radio pocket making them alot easier to reach than the bellow pockets. All tips I'm picking up from everybody here, thanks!
-
Permalink Reply by Ricky Teter on
-
Isn't Home Depot just an incredible place!
-
Permalink Reply by Todd Trudeau on
-
Yes it is Ricky! The shears I have are concidered by-pass cutters, not sure if that was the problem or not. Attached is a pic from Channel lock website on the pair I have now
- Attachments:
-
-
350S.jpg, 5 KB
-
-
Permalink Reply by Jeff Clayton on -
I carry a set of 'Stanley' Tin-snips. They don't open as wide as the shears that have been mentioned in the previous posts, however, they are designed for metal.
After putting some thought into this, it would also be difficult to get both a wire and my airline in these snips in the darkness...an option I like!
Stay safe
-
Permalink Reply by Mike Weber on -
I have found that these work pretty well and the blades are replaceable. I am able to cut most wires and soft goods with ease. However I am unable to cut drop-ceiling track with them.
http://www.amazon.com/Gerber-22-00521-Superknife-Ultra-Shear/dp/B00...
-
Permalink Reply by Chris Borchardt on -
Don, I am a high voltage power lineman and I carry a pair of Kline linemans pliers in my turnout gear. They do have the spring in the handle and are almost indestructable. I use them at work to cut steel strands on guy wire. But if you are looking for something to cut soft drawn like battery cables at car crashes or household wiring look into greenlee hand tools they make a ratching cable cutter that you can cut pretty large wire with by useing just one hand. They work well for tight spots.
Stay Safe. Chris W.F.D.
A Message From Bobby Halton
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our policy page HERE.
Badge
Fire Engineering Features
NFPA 1403 Live-Fire Evolutions at Fire Service Training Centers
Live fire training is an essential part of a firefighter's education, but there are significant differences between training at gas-fired versus non-gas-fired structures. Mike Gurr takes a closer look.Fire Engineering University: Online Continuing Education for Firefighters
Fire Engineering University is changing the way fire service professionals approach continuing education. Our goal is to provide you with relevant, topical educational content that is easily accessible. For a full listing of courses with descriptions, credits, and fees, go to www.fireengineeringuniversity.com.New Vehicle Extrication: 2010 Lexus HS250h
The first compact hybrid luxury sedan, this hybrid only model contains several unique features, including numerous air bags. Jason Emery reviews considerations for vehicle rescue operations.© 2010 Created by fireeng
